Husqvarna LTH1738
Husqvarna LTH1738
Electrical
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 16 34-65 | Battery | ||
| 2 | 874 76 04-12 | Bolt Hex Head 1/4-20 x 3/4 | ||
| 8 | 532 19 32-28 | Box Battery | ||
| 16 | 532 17 61-38 | Switch Interlock Push-In | ||
| 21 | 532 40 02-52 | Harness Socket Light w/4152J | ||
| 22 | 532 00 41-52 | Bulb Light | ||
| 25 | 581 49 80-01 | Cable Starter | ||
| 26 | 532 17 51-58 | Fuse | ||
| 27 | 873 51 04-00 | Nut Keps Hex 1/4-20 unc | ||
| 28 | 532 42 16-86 | Cable, Ground | ||
| 29 | 532 40 15-45 | Switch, Seat | ||
| 30 | 532 19 33-50 | Switch, Ign | ||
| 33 | 532 41 19-33 | Key/Chain | ||
| 34 | 532 11 07-12 | Switch Light/Reset | ||
| 40 | 581 02 31-01 | Harness Ign. Dash | ||
| 43 | 582 04 28-01 | Solenoid | ||
| 55 | 817 06 05-12 | Screw Thdrol 5/16-18 x 3/4 | ||
| 71 | 501 13 37-01 | Harness Chassis | ||
| 79 | 532 17 52-42 | Socket Asm Bulb Twistlock | ||
| 87 | 532 19 78-02 | Switch Interlock Clutch Cable | ||
| 90 | 532 43 53-95 | Cover, Terminal Battery | ||
| 92 | 532 19 66-15 | Harness Pigtail Console | ||
| 93 | 532 19 25-40 | Screw Plastite 10-14 x 2.0 | ||
| 94 | 532 19 18-34 | Module Reverse ROS | ||
| 99 | 817 67 04-12 | Screw | ||
| 106 | 532 17 48-14 | Pal nut |
Chassis
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 3 | 581 05 63-01 | Logo | ||
| 5 | 501 86 11-01 | Dash | ||
| 14 | 532 44 12-67 | Hood | ||
| 15 | 532 44 14-28 | Lens LH | ||
| 18 | 532 44 13-68 | Grille | ||
| 25 | 532 44 14-27 | Lens RH | ||
| 34 | 580 91 08-01 | Plate Engine | ||
| 36 | 817 06 05-12 | Screw 5/16-18 x 3/4 | ||
| 37 | 532 44 12-66 | Fender | ||
| 52 | 873 68 05-00 | Nut Crown Lock 5/16 | ||
| 68 | 539 99 08-58 | Screw THDROL 5/16-18 x 1/2 | ||
| 125 | 581 68 48-01 | Fuel Line Clip | ||
| 130 | 532 41 63-58 | Screw #10 x 0.750 BOS Thread | ||
| 137 | 532 40 75-90 | Bumper Dash | ||
| 146 | 581 85 79-01 | Bolt 3/8-16 x 5/8 unc | ||
| 150 | 532 40 66-62 | Air Duct | ||
| 151 | 532 40 78-07 | Bracket Pivot | ||
| 152 | 532 19 95-35 | Shield Browning | ||
| 159 | 817 00 06-12 | Screw Hexwash Thor 3/8-16 x 3/4 | ||
| 162 | 532 14 24-32 | Screw | ||
| 175 | 532 19 94-72 | Crossmember Plate | ||
| 176 | 532 40 07-76 | Screw 10-24 x 5/8 | ||
| 177 | 532 19 52-28 | Bushing Steering | ||
| 180 | 532 19 54-57 | Chassis | ||
| 182 | 532 40 71-76 | Dash Lower | ||
| 183 | 874 52 05-20 | Bolt 5/16-18 x 1-1/4 Full Thd | ||
| 189 | 817 00 05-12 | Screw | ||
| 191 | 532 41 65-01 | Insert Reflective RH | ||
| 194 | 873 90 05-00 | Nut Lock Hex Flange 5/16-18 | ||
| 195 | 532 43 99-76 | Plug Dash | ||
| 199 | 532 41 34-85 | Plate Deck Lift | ||
| 202 | 532 44 13-42 | Vent Side Hood RH | ||
| 203 | 532 44 13-43 | Vent Side Hood LH | ||
| 204 | 532 44 13-75 | Vent Top Hood | ||
| 205 | 532 44 13-44 | Skirt Side RH | ||
| 206 | 532 44 13-45 | Skirt Side LH | ||
| 213 | 874 76 05-12 | Bolt 5/16-18 x 3/4 | ||
| 214 | 532 19 91-45 | Clip Retainer | ||
| 217 | 532 40 91-67 | Rod Pivot Hood | ||
| 218 | 532 19 63-95 | X-Piece Hood Stop | ||
| 228 | 532 19 51-61 | Stud Fastener | ||
| 235 | 532 40 61-29 | Spacer Fender | ||
| 236 | 873 93 05-00 | Nut Lock 5/16-18 unc | ||
| 238 | 532 44 13-74 | Trim | ||
| 239 | 532 40 48-83 | Clip Tinnerman | ||
| 282 | 532 41 41-10 | Clip Retainer | ||
| 283 | 532 43 91-52 | Console Asm LH | ||
| 284 | 532 44 41-64 | Console RH | ||
| 285 | 532 41 63-15 | Console Insert RH | ||
| 286 | 532 41 63-17 | Console Insert LH | ||
| 287 | 817 60 04-06 | Screw Hex Washead 1/4-20 x 3/8 | ||
| 297 | 532 40 66-65 | Insert Reflective LH | ||
| 306 | 873 90 06-00 | Nut Lock Flg 3/8-16 unc | ||
| 375 | 586 90 82-01 | Dash Clip-On Bumper | ||
| 376 | 589 45 87-01 | Mount Asm Huslt Upper Strng | ||
| 377 | 589 45 53-01 | Screw 10 x 1/2 ZN PL Phil Pan AB |
Drive
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | Transaxle, Tufftorq K46BA (448348) | Order parts from transaxle manufacturer | ||
| 2 | 532 12 35-83 | Key Square | ||
| 15 | 819 13 13-16 | Washer 13/32 x 13/16 x 16 Ga. | ||
| 17 | 532 41 36-78 | Spring, Brake | ||
| 22 | 532 19 76-60 | Rod Shift | ||
| 23 | 532 14 08-45 | Knob | ||
| 29 | 532 40 38-06 | Rod, Brake | ||
| 33 | 812 00 00-01 | Ring E | ||
| 35 | 532 40 10-31 | Rod, Brake, Park | ||
| 37 | 532 18 89-67 | Washer Harden .793 x 1.637 x 060 | ||
| 42 | 532 12 48-72 | Cover, Foot Pedal | ||
| 49 | 872 11 06-14 | Bolt | ||
| 50 | 532 19 43-27 | Pulley Idler Flat | ||
| 51 | 873 90 06-00 | Lock Nut 3/8-16 | ||
| 52 | 532 19 43-26 | Idler V-Groove Offset | ||
| 56 | 532 13 09-69 | V-Belt, Drive | ||
| 64 | 532 19 62-00 | Shaft Asm. Pedal Brake Control | ||
| 69 | 532 42 33-03 | Hairpin .059 x 1.125 | ||
| 73 | 874 49 05-40 | Bolt Hex 5/16-18 x 2 1/2 Gr. 5 | ||
| 99 | 582 40 45-01 | Rod Spring Bypass | ||
| 116 | 873 90 05-00 | Nut Lock Hex Flange 5/16-18 | ||
| 125 | 817 00 05-12 | Screw 5/16-18 x 3/4 | ||
| 143 | 539 99 08-58 | Screw THDROL 5/16-18 x 1/2 | ||
| 153 | 532 12 47-88 | Retainer Spring 1 " | ||
| 159 | 876 02 04-12 | Pin Cotter 1/8 x 3/4 | ||
| 160 | 532 16 94-84 | Retainer Clip | ||
| 161 | 532 10 57-09 | Spring, Return, Clutch | ||
| 166 | 532 42 91-64 | Nut Push .625 | ||
| 167 | 532 40 52-57 | Latch Brake Parking | ||
| 170 | 532 19 43-22 | Keeper Belt Centerspan | ||
| 171 | 872 11 06-16 | Bolt RD HD SQ NK 3/8-16 unc x 2 | ||
| 174 | 532 19 72-89 | Nut Push | ||
| 175 | 532 40 62-08 | Shaft Asm Shift | ||
| 176 | 532 19 62-14 | Arm Clevis Rod Shift | ||
| 178 | 532 19 74-56 | Spring Shift | ||
| 183 | 532 13 70-57 | Spacer Axle | ||
| 184 | 532 41 14-84 | Handle Parking Brake | ||
| 185 | 872 11 06-22 | Bolt | ||
| 186 | 532 19 43-21 | Spacer Retainer | ||
| 187 | 819 13 32-10 | Washer | ||
| 188 | 582 21 70-01 | Link Clutch Ground Drive, Long | ||
| 189 | 532 19 43-17 | Bellcrank Ground Drive | ||
| 190 | 532 19 43-18 | Keeper Bellcrank Ground Drive | ||
| 205 | 532 12 17-48 | Washer 25/32 x 1-5/8 x 16 Ga. | ||
| 211 | 532 19 62-12 | Bushing Shaft | ||
| 216 | 532 19 61-31 | Bracket Pulley Idler | ||
| 221 | 532 40 31-87 | Retainer Spring Clip Handle | ||
| 225 | 532 40 33-19 | Keeper Belt | ||
| 227 | 817 49 05-12 | Screw THDROL 5/16-18 x 3/4 | ||
| 232 | 874 78 07-16 | Bolt 7/16-14 x 1 Gr 5 | ||
| 233 | 532 40 52-96 | Washer Serrated | ||
| 279 | 532 40 62-07 | Link Shift | ||
| 325 | 585 66 85-01 | Torque Strap LH | ||
| 326 | 585 67 08-01 | Bracket Torque Strap RH | ||
| 336 | 587 25 96-01 | Bolt 5/16-18 x 1-3/4 |
Engine
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | Engine Husqvarna Model No. LC1P92F-1 (592822601) | |||
| 2 | 532 44 67-60 | Muffler | ||
| 9 | 501 83 26-01 | Keeper Belt Engine | ||
| 12 | 586 47 85-01 | Pulley Engine | ||
| 15 | 532 43 30-08 | Tank Fuel | ||
| 18 | 581 17 61-01 | Cap Fuel | ||
| 20 | 532 18 38-97 | Control Throttle/Choke | ||
| 21 | 532 41 63-58 | Screw #10 x 0.750 BOS Thread | ||
| 28 | 532 40 11-37 | Fuel Line | ||
| 29 | 532 13 71-80 | Spark Arrester Kit | ||
| 37 | 532 12 34-87 | Clamp Hose | ||
| 42 | 539 99 02-47 | Washer Lock 7/16 SLW STD. | ||
| 45 | 873 51 04-00 | Nut Keps Hex 1/4-20 unc | ||
| 69 | 590 86 35-01 | Gasket | ||
| 79 | 532 18 39-06 | Screw 5/16-18 x 1 Socket Head | ||
| 85 | 501 60 65-01 | Bolt Hex 7/16-20 x 4 Gr. 5 1.5 | ||
| 87 | 532 17 18-77 | Bolt 5/16-18 unc x 3/4 | ||
| 90 | 817 00 06-16 | Screw 3/8-16 x 1 | ||
| 92 | 817 12 06-16 | Screw 3/8-16 x 1 | ||
| 94 | 590 86 47-01 | Exhaust Tube | ||
| 96 | 819 09 14-16 | Washer 9/32 x 7/8 x 16 Ga. | ||
| 97 | 817 67 04-12 | Screw 1/4-20 x 3/4 | ||
| 111 | 532 41 41-19 | Purge Line | ||
| 122 | 532 42 19-22 | Extension Drain Oil |
Steering Assembly
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 43 97-40 | Wheel, Steering | ||
| 2 | 532 19 59-68 | Axle Asm., Front | ||
| 4 | 532 40 30-87 | Spindle Asm., LH | ||
| 5 | 532 40 30-88 | Spindle Asm., RH | ||
| 6 | 532 12 49-31 | Bearing, Race Thrust Harden | ||
| 7 | 532 12 17-48 | Washer 25/32 x 1-5/8 x 16 Ga. | ||
| 8 | 812 00 00-29 | Ring, Klip #T5304-75 | ||
| 9 | 532 12 12-32 | Cap, Spindle | ||
| 13 | 532 12 17-49 | Washer SLW ZD 3/8 | ||
| 14 | 539 99 01-18 | Washer, Lock Hvy Hlcl Spr 3/8 | ||
| 15 | 873 54 06-00 | Nut, Crown Lock 3/8-24 unf | ||
| 16 | 585 86 92-02 | Steering Shaft | ||
| 19 | 532 19 47-29 | Plate Steering | ||
| 20 | 532 44 14-25 | Boot Steering | ||
| 21 | 532 18 67-37 | Adapter, Wheel Steering | ||
| 22 | 585 02 98-02 | Bearing Shaft | ||
| 26 | 532 43 97-43 | Insert, Wheel Steering | ||
| 27 | 819 21 16-16 | Washer 21/32 x 1 x 16 Ga. | ||
| 28 | 817 00 06-12 | Screw 3/8-16 x 3/4 | ||
| 33 | 539 99 01-87 | Lockwasher 5/16 | ||
| 35 | 532 19 47-32 | Gear, Sector Plate | ||
| 45 | 819 11 38-12 | Washer 11/32 ID x 2 3/8 OD x 12 Ga. | ||
| 53 | 532 18 89-67 | Washer Hardened .793 x 1.637 x .060 | ||
| 57 | 532 40 74-65 | Bracket Upstop | ||
| 58 | 532 19 47-47 | Bolt Shoulder Sector Pivot CFM | ||
| 59 | 532 19 47-48 | Washer Thrust Sector Steering | ||
| 60 | 873 97 10-00 | Nut Flange Lock 5/8-11 | ||
| 61 | 588 79 44-02 | Draglink, LH | ||
| 62 | 588 79 45-02 | Draglink, RH | ||
| 63 | 817 00 05-12 | Screw 5/16-18 x 3/4 | ||
| 64 | 532 19 98-49 | Retainer Clip Spring Steering | ||
| 66 | 871 02 07-48 | Bolt Hex Fghd 7/16-14 x 3 Serr | ||
| 67 | 532 19 47-37 | Bushing PM Front Axle | ||
| 68 | 873 90 07-00 | Nut Lock Flange 7/16-14 Gr. 5 | ||
| 69 | 532 19 91-62 | Washer 1.5 x .505 x .118 | ||
| 70 | 585 33 88-01 | Bracket Deck Susp. Front | ||
| 71 | 532 19 07-52 | Shaft Exten. Strg. | ||
| 72 | 532 42 89-82 | Bolt Fin Hx. 5/16-18 x 4 w/Patch | ||
| 75 | 580 68 37-01 | Pinion | ||
| 76 | 580 68 36-01 | Screw Head Sock | ||
| 122 | 532 44 49-62 | Cap Gear |
Mower Deck
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 587 77 18-14 | Mower Housing | ||
| 6 | 532 19 51-86 | Arm Suspension | ||
| 7 | 532 41 63-58 | Screw #10 x 0.750 BOS Thread | ||
| 11 | 581 11 63-01 | Blade 38" | ||
| 13 | 587 25 65-01 | Shaft Assembly, Mandrel | ||
| 14 | 532 18 72-81 | Housing, Mandrel | ||
| 15 | 585 32 39-01 | Bearing, Ball, Mandrel | ||
| 19 | 532 19 65-39 | Bolt, Shoulder | ||
| 21 | 873 68 05-00 | Nut, Crownlock 5/16-18 unc | ||
| 23 | 532 19 25-57 | Bracket, Deflector | ||
| 24 | 532 10 53-04 | Cap, Sleeve | ||
| 25 | 532 19 70-26 | Spring, Torsion, Deflector | ||
| 26 | 532 11 04-52 | Nut, Push | ||
| 27 | 532 19 39-68 | Shield, Deflector | ||
| 29 | 532 13 14-91 | Rod, Hinge | ||
| 32 | 532 19 97-89 | Pulley, Mandrel | ||
| 33 | 532 40 02-34 | Nut, Toplock, Flanged | ||
| 34 | 872 11 06-12 | Bolt Carr Sh. 3/8-16 x 1-1/2 Gr. 5 | ||
| 37 | 819 13 13-16 | Washer | ||
| 38 | 532 19 95-41 | Keeper Belt LH Mandrel | ||
| 40 | 873 90 06-00 | Nut, Lock Flg. 3/8-16 unc | ||
| 41 | 584 95 39-01 | Bolt Hex Wshrhd 313-18 x 1.19 | ||
| 42 | 532 19 84-10 | Spring Torsion Brake | ||
| 43 | 532 19 72-56 | Spring Torsion Retainer | ||
| 46 | 532 13 77-29 | Screw 1/4-20 x 5/8 | ||
| 55 | 532 19 72-49 | Arm, Idler | ||
| 56 | 532 19 90-92 | Spacer, Retainer | ||
| 57 | 817 00 06-16 | Screw 3/8-16 x 1 | ||
| 59 | 532 14 10-43 | Guard, Tuv Idler | ||
| 60 | 532 19 94-71 | Arm Brake Mower LH | ||
| 63 | 532 19 94-70 | Arm Brake Mower RH | ||
| 64 | 532 19 99-18 | Link Brake | ||
| 67 | 532 40 30-12 | Handle Clutch Cable | ||
| 68 | 532 40 83-81 | V-Belt | ||
| 69 | 872 14 05-05 | Bolt | ||
| 70 | 532 40 12-46 | Clutch Asm Manual | ||
| 115 | 872 11 05-05 | Bolt Carr. 5/16-18 x 5/8 | ||
| 116 | 532 12 48-42 | Bolt, Shoulder | ||
| 117 | 589 52 74-01 | Wheel, Gauge | ||
| 119 | 819 12 14-14 | Washer 3/8 x 7/8 x 14 Ga. | ||
| 122 | 532 19 72-58 | Keeper Belt Engine LH | ||
| 123 | 532 19 72-59 | Keeper Belt Engine RH | ||
| 144 | 532 19 34-14 | Keeper Belt | ||
| 145 | 532 19 31-97 | Pulley Idler | ||
| 147 | 532 40 18-72 | Spring Return | ||
| 152 | 532 43 51-11 | Manual Clutch Cable | ||
| 188 | 532 19 51-61 | Stud Fastener | ||
| 189 | 873 90 05-00 | Nut Lock Hex Flange | ||
| 195 | 817 00 06-12 | Screw 3/8-16 x 3/4 | ||
| 199 | 532 40 00-95 | Baffle Vortex | ||
| 208 | 817 67 06-08 | Screw Thdrol 3/8-16 x 1/2 | ||
| 209 | 819 13 32-10 | Washer 13/32 x 2 x 10 | ||
| 254 | 584 30 93-01 | Screw Sems 7/16-20 x 1 Hex Head | ||
| 587 25 33-01 | Mandrel Assembly | (Includes housing (key# 14), shaft assembly (key# 13), and bearing (Key#15) only - pulley/ washer and blade bolt/washers not included | ||
| 592 93 89-01 | Replacement Mower, Complete |
Mower Lift
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 2 | 532 42 20-27 | Shaft Asm., Lift | ||
| 3 | 532 19 52-31 | Lever Asm., Lift RH | ||
| 7 | 580 96 23-01 | Grip, Lever | ||
| 10 | 532 19 63-14 | Spring Torsion | ||
| 87 | 532 19 42-09 | Pin Cotter 7/16 Bow Tie Lock | ||
| 88 | 532 41 07-10 | Spring | ||
| 89 | 819 19 19-12 | Washer Clear Zinc | ||
| 90 | 532 19 42-08 | Pin Cotter 5/16 Bow Tie Lock | ||
| 91 | 532 19 51-81 | Link Asm Lift LH Rear | ||
| 97 | 817 00 06-12 | Screw Hex Wsh. THDR 3/8-16 x 3/4 | ||
| 98 | 532 19 52-70 | Link Lift Susp. Front Mower | ||
| 100 | 873 93 06-00 | Nut Centerlock 3/8-16 unc | ||
| 101 | 532 40 70-03 | Link Asm. Fixed | ||
| 116 | 819 15 15-16 | Washer 15/32 x 15/16 x 16 Ga. |
Seat Assembly
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 43 98-19 | Seat | ||
| 2 | 532 18 01-66 | Bracket Pivot Fender | ||
| 6 | 873 80 06-00 | Nut, Lock w/Ins. 3/8-16 unc | ||
| 7 | 589 48 35-01 | Spring, Seat Cprsn | ||
| 8 | 532 17 18-77 | Bolt 5/16-18 unc x 3/4 w/Sems | ||
| 10 | 587 23 20-0 | 2 Pan, Seat | ||
| 21 | 587 90 78-0 | 1 Bolt, Shoulder 5/16-18 x 5/8 | ||
| 37 | 873 80 05-0 | 0 Nut, Lock 5/16-18 unc | ||
| 40 | 532 19 76-6 | 1 Handle Slide Seat | ||
| 41 | 532 19 82-0 | 0 Spring Latch Seat | ||
| 43 | 874 76 06-1 | 2 Bolt Fin Hex 3/8-16 unc x 3/4 | ||
| 44 | 501 05 18-0 | 1 Washer Winged 3/8 ID 1.5 OD | ||
| 46 | 588 09 04-0 | 1 Bolt 3/8-16 x 1: 1.25 OD Wshr |
Decals
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 581 57 89-01 | Decal, Fender Warn./Instructions | ||
| 2 | 581 62 73-01 | Decal, Hood Logo | ||
| 3 | 592 87 70-01 | Decal, Replacement | ||
| 4 | 592 90 67-01 | Decal, Side Panel | ||
| 5 | 584 90 46-01 | Decal, Deflect. Warning | ||
| 6 | 532 42 38-29 | Decal, Warning | ||
| 12 | 581 58 00-03 | Decal, Mower V-Belt Schematic | ||
| 581 72 48-01 | Decal, Bypass | |||
| 532 43 96-81 | Pad, Footrest, LH | |||
| 532 43 99-66 | Pad, Footrest, RH | |||
| 115 93 64-49 | Manual, Operator's | English/Spanish | ||
| 115 93 65-49 | Manual, Parts | English/Spanish | ||
| 587 71 00-26 | Manual, Quick Start Guide | English/Spanish |
Wheels And Tires
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 05 91-92 | Cap Valve Tire | ||
| 2 | 532 06 51-39 | Stem Valve | ||
| 3 | 532 13 83-36 | Rim Asm 6" Front | ||
| 4 | 532 05 99-04 | Tube Front | Service Item Only | |
| 5 | 532 10 62-22 | Tire Front 15 x 6-6 | ||
| 6 | 532 12 49-57 | Fitting Grease | Front Wheel Only | |
| 7 | 532 12 49-59 | Bearing Flange | Front Wheel Only | |
| 8 | 532 17 50-39 | Cap Axle Blk 1 50 x 1 00 | ||
| 9 | 532 13 84-68 | Tire Rear 20 x 8-8 | ||
| 10 | 532 12 49-26 | Tube Rear | Service Item Only | |
| 11 | 532 13 83-37 | Rim Asm 8" Rear | ||
| 532 14 43-34 | Sealant, Tire | 10 oz. Tube |