Husqvarna TS 38
Husqvarna TS 38
Decals
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 581 57 83-01 | Decal, Warning | ||
| 2 | 581 57 97-01 | Decal, Warning Eng. Sym. | ||
| 3 | 581 62 73-01 | Decal, Hood RH/LH | ||
| 4 | 588 97 78-01 | Decal, Side Panel | ||
| 8 | 587 02 74-01 | Decal, Replacement | ||
| 9 | 581 57 98-01 | Decal, Warning | ||
| 11 | 581 57 91-01 | Decal, Mower Cut Finger Symbol | ||
| 14 | 581 57 96-01 | Decal, Chassis Hot Muffler | ||
| 15 | 585 43 74-10 | Decal, Engine HP | ||
| 21 | 532 44 11-89 | Decal, Belt Sch CRD | ||
| 532 44 27-44 | Decal, Battery | |||
| 532 44 18-02 | Pad Footrest RH | |||
| 532 44 14-09 | Pad Footrest LH | |||
| 588 82 14-01 | Decal, Inst. Mulch Plug | |||
| 115 93 53-40 | Manual Operator's | Euro | ||
| 115 93 54-50 | Manual Operator's | Scan | ||
| 115 93 55-20 | Manual Operator's | E-Bloc | ||
| 115 93 56-30 | Manual Operator's | Baltic |
Wheels And Tires
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 05 91-92 | Cap Valve Tire | ||
| 2 | 532 06 51-39 | Stem Valve | ||
| 3 | 532 10 62-22 | Tire Front 15 x 6-6 | ||
| 4 | 532 05 99-04 | Tube Inner Front #35060 | ||
| 5 | 532 13 83-36 | Rim Asm 6" Front | ||
| 6 | 532 12 49-57 | Fitting Grease | ||
| 7 | 532 12 49-59 | Bearing Flange | ||
| 8 | 532 13 83-37 | Rim Asm 8" Rear | ||
| 9 | 532 12 46-35 | Tire Rear 18 x 8.5-8 | ||
| 10 | 532 12 49-26 | Tube Rear 8.5 x 8 | ||
| 11 | 532 17 50-39 | Cap Axle | ||
| 532 14 43-34 | Sealant, Tire | 10 oz. Tube |
Electrical
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 43 71-57 | Battery | ||
| 2 | 532 44 09-23 | Screw Hex Hd Cap M6 x 1.12mm | ||
| 16 | 532 17 61-38 | Switch Interlock | ||
| 21 | 532 40 02-52 | Harness Asm Light w/4152J | ||
| 22 | 532 00 41-52 | Bulb Light #1156 | ||
| 25 | 581 48 98-01 | Cable Battery Red | ||
| 26 | 532 17 51-58 | Fuse | ||
| 27 | 873 51 04-00 | Nut Keps Hex 1/4-20 unc | ||
| 28 | 581 48 98-02 | Cable Ground Black | ||
| 29 | 532 40 15-45 | Switch Seat | ||
| 30 | 532 19 33-50 | Switch Ignition | ||
| 33 | 532 41 19-35 | Key/Chain | ||
| 34 | 532 11 07-12 | Switch Light | ||
| 40 | 532 42 10-02 | Harness Ignition Dash | ||
| 43 | 582 04 28-01 | Solenoid | ||
| 55 | 817 06 05-12 | Screw 5/16-18 x 3/4 | ||
| 71 | 585 84 97-01 | Harness Chassis | ||
| 79 | 532 17 52-42 | Socket Asm. | ||
| 83 | 532 43 67-74 | Nut Square M6 x 1 x 8.5 x 11mm | ||
| 87 | 532 42 10-60 | Switch Railmount | ||
| 92 | 532 19 66-15 | Harness Pigtail | ||
| 93 | 532 19 25-40 | Screw Plastic 10-14 x 2.0 | ||
| 94 | 532 19 18-34 | Module Reverse ROS | ||
| 99 | 817 00 05-12 | Screw 5/16-18 x 3/4 | ||
| 107 | 532 18 03-79 | Switch Full Bagger Indicator | ||
| 108 | 532 42 10-62 | Switch Snapmount |
Chassis And Enclosers
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 3 | 581 05 63-01 | Logo | ||
| 5 | 501 86 11-01 | Dash | ||
| 14 | 532 44 12-67 | Hood | ||
| 15 | 532 44 14-28 | Lens LH | ||
| 18 | 532 44 13-68 | Grille | ||
| 25 | 532 44 14-27 | Lens RH | ||
| 34 | 580 91 09-01 | Plate Engine | ||
| 36 | 817 06 05-12 | Screw 5/16-18 x 3/4 | ||
| 37 | 532 44 13-69 | Fender | ||
| 52 | 873 68 05-00 | Nut Crownlock 5/16-18 | ||
| 62 | 872 11 06-08 | Bolt 3/8-16 x 1 Gr. 5 | ||
| 68 | 539 99 08-58 | Screw Thdrol. 5/16-18 x 1/2 | ||
| 118 | 819 13 13-16 | Washer 13/32 x 13/16 x 16 | ||
| 119 | 873 68 06-00 | Nut Crown Lock | ||
| 130 | 532 41 63-58 | Screw #10 x .750 BOS Thread | ||
| 137 | 532 40 75-90 | Bumper Dash | ||
| 150 | 532 40 66-62 | Air Duct | ||
| 151 | 532 40 78-07 | Bracket Pivot | ||
| 152 | 532 19 95-35 | Shield Browning | ||
| 159 | 817 00 06-12 | Screw 3/8-16 x 3/4 | ||
| 162 | 532 14 24-32 | Screw Hex Wsh. Hi-Lo 1/4 x 1/2 unc | ||
| 175 | 532 19 94-72 | Crossmember | ||
| 176 | 532 40 07-76 | Screw 10-24 x 5/8 | ||
| 177 | 532 19 52-28 | Bushing Steering | ||
| 180 | 581 18 71-01 | Chassis | ||
| 182 | 532 40 71-76 | Dash Lower | ||
| 183 | 874 52 05-20 | Bolt 5/16-18 x 1-1/4 | ||
| 184 | 587 63 36-01 | Plug End | ||
| 189 | 817 00 05-12 | Screw 5/16-18 x 3/4 | ||
| 191 | 532 41 65-01 | Insert Reflective RH | ||
| 194 | 873 90 05-00 | Nut Lock Hex Flange 5/16-18 | ||
| 199 | 532 41 87-39 | Plate Deck Lift | ||
| 202 | 532 44 13-42 | Vent Side Hood RH | ||
| 203 | 532 44 13-43 | Vent Side Hood LH | ||
| 204 | 532 44 13-75 | Vent Top Hood | ||
| 205 | 532 44 13-44 | Skirt Side RH | ||
| 206 | 532 44 13-45 | Skirt Side LH | ||
| 213 | 874 76 05-12 | Bolt Hex HD 5/16-18 unc 3/4 | ||
| 214 | 532 19 91-45 | Clip Retainer | ||
| 217 | 532 40 91-67 | Rod Pivot Hood | ||
| 218 | 532 19 63-95 | X-Piece Hood Stop | ||
| 228 | 532 19 51-61 | Stud Fastener | ||
| 235 | 532 40 61-29 | Spacer Fender | ||
| 236 | 873 93 05 00 | Nut Center Lock 5/16-18 unc | ||
| 238 | 532 44 13-74 | Trim | ||
| 239 | 532 40 48-83 | Clip Tinnerman | ||
| 282 | 532 41 41-10 | Clip Retainer | ||
| 283 | 532 44 05-31 | Console Deck Lift | ||
| 284 | 532 44 08-59 | Console Shift RH | ||
| 287 | 817 60 04-06 | Screw Hex Washead. 1/4-20 x 3/8 | ||
| 297 | 532 40 66-65 | Insert Reflective LH | ||
| 303 | 587 49 31-02 | Shield LH | ||
| 304 | 589 41 27-01 | Shield RH | ||
| 307 | 587 52 74-01 | Shield Upper RH | ||
| 308 | 532 17 18-77 | Bolt 5/16-18 unc x 3/4 | ||
| 309 | 501 18 83-01 | Backplate | ||
| 310 | 532 44 66-36 | Bracket Hangbar Bag LH | ||
| 311 | 532 44 66-37 | Bracket Hangbar Bag RH | ||
| 319 | 532 17 46-62 | Bracket Actuator Bagger | ||
| 334 | 532 44 25-37 | Bracket Engine | ||
| 338 | 532 43 66-40 | Bolt Shoulder | ||
| 339 | 532 43 66-41 | Lever Bagger Full | ||
| 340 | 532 44 09-31 | Door Battery Tray | ||
| 341 | 582 06 08-01 | Latch Batter Tray | ||
| 342 | 582 82 68-02 | Support Fender | ||
| 343 | 532 44 07-49 | Clip | ||
| 371 | 587 49 45-01 | Shield Upper | ||
| 375 | 586 90 82-01 | Dash Clip-On Bumper | ||
| 376 | 589 45 87-01 | Mount Asm Hush Upper Strng | ||
| 377 | 589 45 53-01 | Screw 10 x 1/2 ZN PL Phil | ||
| 532 43 99-76 | Dash SRV Minder |
Drive
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | Transaxle, Peerless 206-578 (436815) | Order parts from transaxle manufacturer | ||
| 2 | 532 12 35-83 | Key Square | ||
| 6 | 532 12 40-28 | Bushing | ||
| 15 | 819 13 13-16 | Washer | ||
| 17 | 532 44 08-67 | Spring, Brake | ||
| 22 | 532 44 32-46 | Rod Shift CRD Tex | ||
| 23 | 532 12 12-74 | Knob | ||
| 26 | 532 14 66-82 | Spring Brake Return | ||
| 29 | 532 43 70-16 | Rod, Brake | ||
| 30 | 819 13 16-16 | Washer | ||
| 33 | 812 00 00-01 | Ring E | ||
| 35 | 532 40 10-31 | Rod, Brake, Park | ||
| 37 | 532 18 89-67 | Washer Hardened | ||
| 42 | 532 12 48-72 | Cover, Foot Pedal | ||
| 49 | 872 11 06-14 | Bolt | ||
| 50 | 532 19 43-27 | Idler Flat | ||
| 51 | 873 90 06-00 | Lock Nut 3/8-16 | ||
| 52 | 532 19 43-26 | Pulley Idler V Groove Plastic | ||
| 56 | 532 43 63-84 | V-Belt, Drive | ||
| 61 | 532 16 59-99 | Pulley Transaxle | ||
| 64 | 532 19 62-00 | Shaft Asm. Pedal Brake Control | ||
| 73 | 874 49 05-56 | Bolt Hex 5/16-18 x 3.75 | ||
| 78 | 819 11 12-12 | Washer 11/32 x 3/4 x 12 Ga. | ||
| 90 | 532 44 36-05 | Keeper Belt Clutching | ||
| 103 | 873 35 05-00 | Nut | ||
| 116 | 873 90 05-00 | Nut Lock Hex Flange 5/16-18 | ||
| 125 | 817 00 05-12 | Screw 5/16-18 x 3/4 | ||
| 126 | 532 16 60-02 | Washer Srrtd 5/16 ID x 1.0 x .125 | ||
| 127 | 582 21 70-01 | Link Clutch Ground Drive, Long | ||
| 134 | 532 14 50-90 | Asm. Shift | ||
| 139 | 874 55 04-12 | Bolt 1/4-28 unf Gr. 8 w/Patch | ||
| 140 | 810 04 04-00 | Washer Lock Hvy. Helical 1/4 | ||
| 141 | 819 09 12-10 | Washer 9/32 x 3/4 x 10 Ga. | ||
| 143 | 539 99 08-58 | Screw Thdrol 5/16-18 x 1/2 TYTT | ||
| 155 | 812 00 00-28 | Ring Retainer | ||
| 157 | 532 10 57-01 | Washer Plate Shift | ||
| 159 | 876 02 04-12 | Cotter Pin | ||
| 160 | 532 16 94-84 | Retainer Clip | ||
| 161 | 532 10 57-09 | Spring, Return, Clutch | ||
| 165 | 532 19 62-12 | Bushing Shaft Brake Hand Control | ||
| 166 | 532 42 91-64 | Nut Push .625 | ||
| 167 | 532 40 52-57 | Latch Brake Parking | ||
| 174 | 532 19 72-89 | Nut Push | ||
| 183 | 532 13 70-57 | Spacer Axle | ||
| 184 | 532 41 14-84 | Knob | ||
| 185 | 872 11 06-22 | Bolt | ||
| 186 | 532 19 43-21 | Spacer Retainer | ||
| 189 | 532 43 36-11 | Bellcrank Ground Drive | ||
| 192 | 532 15 03-60 | Nut Lock Center 1/4-28 Fnthd. | ||
| 195 | 580 45 69-01 | Bracket Brake Rod | ||
| 205 | 532 12 17-48 | Washer 25/32 x 1-5/8 16 Ga. | ||
| 221 | 532 40 31-87 | Retaining Spring | ||
| 229 | 817 06 05-16 | Screw | ||
| 263 | 817 00 06-12 | Screw Hexwsh Thdr 3/8-16 x 3/4 | ||
| 268 | 532 18 24-02 | Guard Muffler RH | ||
| 275 | 819 13 16-14 | Washer 13/32 x 1 x 14 Ga. | ||
| 280 | 819 11 10-12 | Washer | ||
| 313 | 874 78 04-16 | Bolt | ||
| 314 | 532 44 47-13 | Retainer, Belt Style Spring | ||
| 315 | 817 58 05-20 | Screw Thdrol 5/16-18 x 4.25 | ||
| 318 | 532 43 70-22 | Link Shift Gear | ||
| 319 | 532 43 67-94 | Spacer Transaxle Tex CRD | ||
| 328 | 532 43 79-58 | Shaft Shift Front | ||
| 330 | 532 16 95-93 | Washer Nylon | ||
| 331 | 532 44 36-06 | Hub Shift | ||
| 333 | 532 17 08-68 | Wave Spring Washer | ||
| 335 | 532 19 95-34 | Pulley V-Idler | ||
| 337 | 532 43 59-37 | Bracket Supt Shift CRD Tex | ||
| 339 | 532 43 68-67 | Strap Torue K46 CRD Tex | ||
| 340 | 532 43 68-12 | Idler Flat | ||
| 342 | 532 18 26-82 | Keeper Belt | ||
| 344 | 532 43 56-45 | Bracket Idler CRD Tex | ||
| 348 | 532 44 36-07 | Bracket Pivot Lever | ||
| 350 | 532 44 50-20 | Spring Torsion Shift | ||
| 351 | 532 43 69-98 | Bracket | ||
| 354 | 817 49 05-10 | Screw | ||
| 357 | 532 44 13-38 | Belt Keeper | ||
| 359 | 817 49 06-10 | Screw Hxwsh Thdr 3/8-16 x 5/8 | ||
| 364 | 532 44 30-32 | Bracket |
Engine
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | Engine B&S Model No. 21R707-0118-B1(579690101) | Order parts from engine manufacturer | ||
| 2 | 532 17 97-58 | Muffler | ||
| 9 | 501 83 26-01 | Keeper Belt Engine | ||
| 12 | 586 47 85-01 | Pulley Engine | ||
| 15 | 581 28 99-01 | Tank Fuel 1.5 | ||
| 18 | 532 43 02-20 | Cap Fuel | ||
| 20 | 532 18 38-97 | Control Throttle | ||
| 21 | 532 41 63-58 | Screw #10 x 0.750 BOS Thread | ||
| 28 | 532 13 70-40 | Fuel Line | ||
| 29 | 532 13 71-80 | Spark Arrester Kit | ||
| 37 | 532 12 34-87 | Clamp Hose | ||
| 42 | 539 99 02-47 | Lock SLW STD 7/16 | ||
| 43 | 817 06 05-16 | Screw 5/16-18 x 1 | ||
| 45 | 873 51 04-00 | Nut Keps Hex 1/4-20 unc | ||
| 69 | 532 16 52-91 | Gasket | ||
| 79 | 532 19 23-34 | Screw Socket HD 5/16-18 x .75 | ||
| 84 | 817 06 06-20 | Screw | ||
| 85 | 501 60 65-01 | Bolt Hex 7/16-20 x 4 x Gr. 5-1.5 Thr | ||
| 90 | 817 00 06-16 | Screw 3/8-16 x 1 | ||
| 96 | 819 09 14-16 | Washer 9/32 x 7/8 x 16 Ga. | ||
| 97 | 817 67 04-12 | Screw 1/4-20 x 3/4 | ||
| 108 | 587 17 95-10 | Cover Pulley Engine w/SHLD | ||
| 122 | 532 42 19-22 | Extension Drain Oil |
Steering Assembly
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 43 99-97 | Wheel, Steering | ||
| 2 | 532 41 81-68 | Axle Asm. | ||
| 4 | 532 40 30-87 | Spindle Asm., LH | ||
| 5 | 532 40 30-88 | Spindle Asm., RH | ||
| 6 | 532 12 49-31 | Bearing, Race Thrust Harden | ||
| 7 | 532 12 17-48 | Washer 25/32 x 1-5/8 x 16 Ga. | ||
| 8 | 812 00 00-29 | Ring, Klip #T5304-75 | ||
| 9 | 532 12 12-32 | Cap, Spindle | ||
| 13 | 532 12 17-49 | Washer 25/32 x 1-1/4 x 16 Ga. | ||
| 14 | 539 99 01-18 | Washer, SLW ZD 3/8 | ||
| 15 | 873 54 06-00 | Nut, Crown Lock 3/8-24 unf | ||
| 16 | 585 86 92-02 | Steering Shaft | ||
| 19 | 532 19 47-29 | Plate Steering | ||
| 20 | 532 44 14-25 | Boot, Steering | ||
| 21 | 532 18 67-37 | Adapter, Wheel Steering | ||
| 22 | 585 02 98-02 | Bearing | ||
| 26 | 532 43 97-43 | Insert, Wheel Steering | ||
| 27 | 819 21 16-16 | Washer 21 x 32 x 1 x 16 Ga. | ||
| 28 | 817 00 06-12 | Screw 3/8-16 x 3/4 | ||
| 33 | 539 99 01-87 | Washer Lock 5/16 | ||
| 35 | 532 19 47-32 | Gear, Sector Plate | ||
| 45 | 819 11 38-12 | Washer 11/32 x 3/8 x 12 Ga. | ||
| 53 | 532 18 89-67 | Washer Hardened .793 x 1.637 x .060 | ||
| 58 | 532 19 47-47 | Bolt Shoulder Sector Pivot CFM | ||
| 59 | 532 19 47-48 | Washer Thrust Sector Steering | ||
| 60 | 873 97 10-00 | Nut Flange Lock 5/8-11 | ||
| 61 | 532 19 47-40 | Draglink, LH | ||
| 62 | 532 19 47-41 | Draglink, RH | ||
| 63 | 817 00 05-12 | Screw 5/16-18 x 3/4 | ||
| 64 | 532 19 98-49 | Retainer Clip Spring Steering | ||
| 66 | 871 02 07-48 | Bolt Hex Fghd 7/16-14 x 3 Serr | ||
| 67 | 532 19 47-37 | Bushing PM Front Axle | ||
| 68 | 873 90 07-00 | Nut Lock Flange 7/16-14 Gr. 5 | ||
| 69 | 532 19 91-62 | Washer 1.5 x .505 x .118 | ||
| 70 | 585 33 88-01 | Bracket Deck Susp. Front | ||
| 71 | 532 19 07-52 | Shaft Extension Steering | ||
| 72 | 532 42 89-82 | Bolt Fin Hx 5/16-18 x 4 | ||
| 74 | 532 12 49-37 | Bearing | ||
| 75 | 580 68 37-01 | Pinion | ||
| 76 | 580 68 36-01 | Screw Head Sock | ||
| 122 | 532 44 49-62 | Cap Gear Sector |
Mower Deck
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 44 09-71 | Deck Weldment | ||
| 3 | 873 90 05-00 | Nut Lock Hex Flange 5/16 - 18 | ||
| 5 | 817 00 05-10 | Bolt 5/16-18 | ||
| 7 | 532 41 63-58 | Screw #10 x 0.750 BOS Thread | ||
| 10 | 817 00 06-16 | Screw 3/8-16x1 smgml tap | ||
| 11 | 532 13 77-29 | Screw Thd Roll 1/4 - 20 X 5/8 | ||
| 13 | 872 11 06-12 | Bolt Carr Sh 3/8 - 16 x 1-1/2 Gr. 5 | ||
| 14 | 532 15 60-85 | Keeper Belt Idler | ||
| 16 | 873 90 06-00 | Nut Lock FlG 3/8 - 16 unc | ||
| 17 | 532 40 02-34 | Nut Flange Lock Top | ||
| 19 | 532 11 04-85 | Bearing Mandrel | ||
| 23 | 817 49 06-28 | Screw Thdrol 3/8 - 16 X 1-3/4 | ||
| 27 | 532 43 97-26 | V-Belt Drive | ||
| 30 | 584 30 93-01 | Screw Sems 7/16-20 x 1 Hex Head | ||
| 32 | 532 40 18-72 | Spring Return Deck | ||
| 33 | 532 18 72-81 | Housing Mandrel 4pt Service | ||
| 34 | 587 25 65-01 | Shaft Asm Mndrl | ||
| 35 | 532 42 79-84 | Blade Mower LH | ||
| 37 | 819 13 13-16 | Washer 13/32 x 13/16 x 16 Ga. | ||
| 40 | 532 19 72-58 | Keeper Belt Engine LH | ||
| 41 | 584 95 39-01 | Bolt Hex | ||
| 42 | 817 00 05-12 | Screw 5/16-18 x 3/4 | ||
| 43 | 532 19 74-73 | Pulley Mandrel | ||
| 45 | 532 13 71-52 | Housing Mandrel | ||
| 67 | 532 40 30-12 | Handle Clutch Cable | ||
| 70 | 532 40 12-46 | Clutch Asm Manual LT Pred | ||
| 71 | 817 67 06-08 | Screw 3/8-16 x 1/2 | ||
| 72 | 582 03 56-01 | Chute Upper | ||
| 75 | 532 13 14-94 | Pulley Idler Flat | ||
| 76 | 532 43 96-40 | Washout Port | ||
| 80 | 532 42 30-62 | Pal Nut | ||
| 84 | 532 43 25-20 | Keeper Belt LH Mandrel | ||
| 85 | 532 42 79-85 | Blade Mower RH | ||
| 86 | 532 18 17-13 | Bolt 3/8-24 x 1.50 Gr. 8 | ||
| 87 | 539 99 01-18 | Washer Lock Hvy. 3/8 | ||
| 88 | 532 14 02-96 | Washer Hard | ||
| 89 | 532 43 81-24 | Arm Brake 97 LH | ||
| 90 | 532 19 90-92 | Spacer Retainer | ||
| 91 | 819 13 20-12 | Washer 13/32 x 1-1/4 x 12 Ga. | ||
| 92 | 532 43 69-93 | Rod Brake Assembly | ||
| 93 | 532 43 81-25 | Arm Brake RH | ||
| 94 | 532 19 72-50 | Bracket Clutch Cable | ||
| 95 | 817 00 06-12 | Screw 3/8-16 x 3/4 | ||
| 96 | 532 40 02-71 | Spacer | ||
| 97 | 532 18 20-61 | Shield Idler Mower | ||
| 98 | 532 19 51-61 | Stud Fastener | ||
| 99 | 532 19 51-86 | Arm Suspension Mower Rear | ||
| 100 | 532 19 65-39 | Bolt Shoulder | ||
| 101 | 873 68 09-00 | Nut Crownlock 9/16 - 18 unc | ||
| 102 | 532 40 25-11 | Spacer Bearing Swing Plate | ||
| 103 | 532 43 69-92 | Guard Front Vent | ||
| 104 | 532 43 89-68 | Mandrel Cover RH | ||
| 105 | 532 43 87-44 | Mandrel Cover LH | ||
| 106 | 532 19 32-16 | Spring Brake Return | ||
| 110 | 587 93 48-01 | Gear Output | ||
| 111 | 532 43 69-79 | Gasket Gearcase | ||
| 112 | 532 44 38-52 | Shaft Gearcase Adapter | ||
| 113 | 532 43 85-33 | Plug Oil | ||
| 114 | 588 17 05-01 | Vent Breather | ||
| 115 | 818 03 10-16 | Screw Torx #10-24 x 1 | ||
| 116 | 872 11 04-14 | Bolt 1/4-20 x 1.75 Gr. 5 | ||
| 117 | 873 90 04-00 | Nut Hex Flange 1/4-20 unc | ||
| 118 | 532 43 69-89 | Arm Clutching | ||
| 119 | 532 43 81-66 | Gearcase Subasm | ||
| 120 | 532 43 69-91 | Keeper Belt RH | ||
| 121 | 532 43 69-85 | Washer | ||
| 124 | 532 43 69-86 | Non Greasable Mandrel Shaft | ||
| 125 | 532 44 04-20 | Bracket Idler Chassis | ||
| 127 | 532 19 34-06 | Bolt Shoulder 3/8-16 x 3-5/8 Gr. 5 | ||
| 128 | 589 52 73-01 | Wheel Gauge | ||
| 129 | 532 40 48-51 | Rod Anti-Sway | ||
| 130 | 819 13 13-12 | Washer 13/32 x 13/16 x 12 Ga. | ||
| 131 | 532 19 42-08 | Pin Cotter 5/16 Bow Tie Lock | ||
| 132 | 532 17 88-99 | Knob Handle 3/8-16 | ||
| 136 | 532 43 96-39 | Washout Port | ||
| 137 | 812 00 00-29 | Ring Clip | ||
| 138 | 532 44 07-43 | Hose | ||
| 139 | 532 44 07-42 | Hose Clamp | ||
| 140 | 501 57 94-01 | LH Guard | ||
| 141 | 501 57 93-02 | RH Guard | ||
| 152 | 532 44 04-88 | Cable Clutch Manual w/Spring | ||
| 153 | 593 27 46-01 | Nut Hex 9/16-18 unf w/HD Epoxy-Lock | ||
| 159 | 872 14 06-14 | Bolt 3/8-16 unc x 1-3/4 | ||
| 160 | 532 16 89-37 | Nut Push | ||
| 587 25 33-01 | Mandrel Assembly | Includes Housing Assembly (key#33), Shaft Assembly (key#34) and Bearing Only (key#19) - Pulley/ Nut/Washer And Blade Bolt/ Washers Not Included | ||
| 587 49 20-01 | Replacement Mower Complete | |||
| 532 44 81-32 | Gear Case Kit – Use .75 oz. Shell 460 oil | Include Gear Output (key #110), Gasket Gearcase (key #111), Shaft Gearcase (key #112), Plug Oil (key #113),Vent Breather 1/8 NPT (key #114), Screw Torx (key #115), Gearcase Subasm (key #119) |
Mower Lift
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 43 97-09 | Seat | ||
| 2 | 532 18 01-66 | Bracket Pivot Fender | ||
| 3 | 532 14 06-75 | Strap, Asm. Fender | ||
| 6 | 873 80 06-00 | Nut, Lock w/Ins. 3/8-16 unc | ||
| 7 | 589 48 35-01 | Spring, Seat Cprsn. | ||
| 8 | 532 17 18-77 | Bolt 5/16-18 unc x 3/4 w/Sems. | ||
| 10 | 587 23 20-02 | Pan, Seat | ||
| 21 | 587 90 78-01 | Bolt, Shoulder 5/16-18 x 5/8 | ||
| 37 | 873 80 05-00 | Nut, Lock 5/16-18 unc | ||
| 40 | 532 19 76-61 | Handle | ||
| 41 | 532 19 82-00 | Spring | ||
| 43 | 874 76 06-12 | Bolt 3/8-16 unc x 3/4 | ||
| 44 | 501 05 18-01 | Winged Washer 3/8 ID 1.5 OD |
Seat Assembly
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 43 97-09 | Seat | ||
| 2 | 532 18 01-66 | Bracket Pivot Fender | ||
| 3 | 532 14 06-75 | Strap, Asm. Fender | ||
| 6 | 873 80 06-00 | Nut, Lock w/Ins. 3/8-16 unc | ||
| 7 | 589 48 35-01 | Spring, Seat Cprsn. | ||
| 8 | 532 17 18-77 | Bolt 5/16-18 unc x 3/4 w/Sems. | ||
| 10 | 587 23 20-02 | Pan, Seat | ||
| 21 | 587 90 78-01 | Bolt, Shoulder 5/16-18 x 5/8 | ||
| 37 | 873 80 05-00 | Nut, Lock 5/16-18 unc | ||
| 40 | 532 19 76-61 | Handle | ||
| 41 | 532 19 82-00 | Spring | ||
| 43 | 874 76 06-12 | Bolt 3/8-16 unc x 3/4 | ||
| 44 | 501 05 18-01 | Winged Washer 3/8 ID 1.5 OD |
Bagger
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 42 86-10 | Tube Handle Bagger | ||
| 2 | 532 44 13-58 | Applique | ||
| 3 | 532 41 38-08 | Nut Push .156 | ||
| 4 | 579 78 54-01 | Frame Asm Bagger Top | ||
| 5 | 532 41 76-32 | Frame Asm Top Bagger | ||
| 6 | 532 12 68-75 | Rivet Drilled | ||
| 7 | 873 90 04-00 | Nut Hex Flange 1/4-20 unc | ||
| 8 | 532 44 12-61 | Cover Bagger | ||
| 9 | 532 41 76-29 | Insert Handle Bagger | ||
| 10 | 532 43 67-70 | Frame Front | ||
| 11 | 532 43 67-71 | Tubing Brace Bagger | ||
| 12 | 532 42 17-93 | Nut Square 1/4 | ||
| 13 | 532 42 17-80 | Screw 1/4 x 1.150 | ||
| 15 | 532 42 18-01 | Screw #8 Dlat Head Drill Tip | ||
| 19 | 532 19 42-08 | Cotter Pin 5/16 Bow Tie | ||
| 21 | 532 44 83-06 | Bag Asm | ||
| 23 | 872 04 04-10 | Bolt Carr. 1/4-20 | ||
| 25 | 532 42 16-14 | Spring Latch Bagger | ||
| 26 | 817 49 04-12 | Screw 1/4-20 x 3/4 | ||
| 27 | 532 42 12-62 | Grommet Rubber | ||
| 28 | 532 16 57-87 | Grip Handle Black | ||
| 30 | 532 43 74-52 | Plug | ||
| 31 | 532 43 58-61 | Pin Hinge | ||
| 32 | 532 43 74-54 | Spring Double Torsion | ||
| 33 | 532 43 84-51 | Shaft Mulch Plug | ||
| 34 | 532 43 79-88 | E-Ring 5/16 | ||
| 35 | 532 43 91-39 | Grip Mulch Plug | ||
| 36 | 532 43 90-98 | Bolt J | ||
| 37 | 532 06 91-80 | Nut Lock #10-24 unc | ||
| 38 | 819 07 08-18 | Washer 7/32 x 1/2 | ||
| 39 | 532 43 92-42 | Bungee | ||
| 96 | 501 40 66-01 | Screw Hex Cap 1/4-20 x 1.500 | ||
| 97 | 590 10 57-01 | Screw Torx Butn HD 1/4-20-1.5 " |